Torque Monitoring Equipment

Product Details:

TorqueStar Opta is the equipment of choice for the measurement and collection of torque data in the manufacturing environment. The basic TorqueStar Opta performs bi-directional measurement of torque, angle and pulse count in track, peak, 1st peak (click) and pulse measurement modes. For additional information, cycle time duration and tool speed can also be displayed. Time and date stamped readings can be set to print automatically. The easy to read display gives a simultaneous view of all relevant information during the measurement process, while the simple alphanumeric keypad enables fast data entry when required.

Light enough for carrying on a neck strap, yet robust to withstand the rigours of the factory environment, TorqueStar Opta also sports integrated rubber bumpers to protect finished product from accidental damage. Follow the links below for the different software module options of the TorqueStar Opta.

• Basic Storage & Stats
• Advanced Storage & SPC
• Graphs

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit)
• Port of Dispatch: courier
• Delivery Time: within 1-2 weeks
• Packaging Details: box

Product Details:

Features:

• The ReadStar II is a basic, easy to use readout which allows measurement and collection of torque data, with storage of up to 200 readings.
• The multilingual software and consistent interface ensures ease of use when working with external torque transducers.
• The ReadStar II has a variety of modes and can measure track, peak, 1” peak (click) and pulse. Results are shown on an easy read display. Time and date stamped readings can be set to print automatically.
• The ReadStar II can be powered using “C” cells, rechargeable batteries or from the mains. The batteries must be recharged externally to the product, charger not provided. The ReadStar II can either be fixed permanently or used as a portable device

Product Details:

Our superior quality Impact Sockets that are capable of withstanding higher impact loads. In addition to this, the Impact Sockets have high tensile strength and render longer service life. Our unmatched Impact Sockets are available in different designs.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit)
• Port of Dispatch: courier
• Delivery Time: exstock
• Packaging Details: box

Product Details:

Electronic torque wrench with angle is a versatile applications profile for measurement of torque and angle of rotation, Measurement of breakaway torque of an existing screw fastening, The measured breakaway torque value closely matches the existing torque.

The following operating modes are available:Track or Peak mode,"QuickTest" − screw tightening to the specified torque or rotational angle,Screw tightening to the specified values and tolerances,Breakaway torque − closely matches the existing torque.

Acoustic and visual warning signals or reaching or exceeding the set value. Stores up to 900 values.

Product Details:

Industrial vertical handle toggle clamps handles that are in a horizontal position when the clamp is locked. The hold down clamps direct clamping force perpendicular to the clamping arm. Hold down horizontal action toggle clamps A wide variety of and holding capacities are available with industry standard mounting patterns to suit your requirements.

Jala Sales- Clamping solutions ,Pune offers wide range of toggle clamps, hold down horizontal toggle clamps for jigs and fixtures.

Product Details:

The DTS Screw Master is a sample to use, point of load independent, transducerised screwdriver with an attached digital display. The DTA Screw Master features two measurement modes for displaying either peak or real time torque. Upper and lower limits can be set in peak mode enabling an audible signal and an LED to indicate HI, OK or LO fastener status.

The transducer element of the DTS Screw Master us directly in line with the hex drive, thus making the measurement completely independent of the point of load. The display housing is supplied with a convenient neck strap and is connected to the wrench by a curly cable. Up to 100 readings are stored and can be downloaded to a printer or PC for archiving or further processing data.

Key Features:

• Peak or track torque measurement on attached display
• Point of load independent
• HI/OK/LO audible and visual status indication
• 100 reading memory
• 1/4″ hex female drive.

Product Details:

Check Star for dynamic torque and angle measurement of different types of drive and impulse tool. We are applying proven technology to ensure its high performance while you use it. Our Check Star transducers are perfectly matching with assembly tool and fastener in terms of scaling the actual torques under the conditions of production. The low inertia design of this equipment ensures accurate as well as repeatable measurement of high speed transient.

Specifications:

• Dynamic angle
• Advanced technology
• UTA torque system
• High speed transient
• Standard version

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit)
• Port of Dispatch: courier
• Delivery Time: within 1-2 weeks
• Packaging Details: box